1.1 Dilute Phase Flow

1. Z. Aziz and G.E. Klinzing, Cohesive Coal Flow in Horizontal and Inclined Geometries, Powder Tech 55 (1988) 97.

2. J.D. Baker and G.E. Klinzing, Optimal Performance of Pneumatic Transport Systems, in Proceedings of the 9^th IFPS Meeting, Monterrey Mexico, April 1998.

3. L.A. Borzone, G.E. Klinzing and W.C. Yang, Energy Losses and Particle‑Wall Interactions on Rough Surfaces, Powder Tech 62 (1990) 277‑ 290.

4. F.J. Cabrejos and G.E. Klinzing, Characterization of Dilute Gas-Solid Flows Using Rescaled Range Analysis, Powder Tech 84 (1995) 139-156.

5. B.K. Datta and A.K. Basu, Limit Deposit Velocity in Dilute Phase Pneumatic Conveying, Part I, Powder Handling & Processing 5(3) (1993) 241-243.

6. B.K. Datta and A.K. Basu, Limit Deposit Velocity in Dilute Phase Pneumatic Conveying, Part II, Powder Handling & Processing 5(4) (1993) 325–330.

7. B.K. Datta and A.K. Basu, Evaluation of Drop Out Vessel-cum-Feeding Tee Characteristics In a Pneumatic Conveying System, Proceedings of Bulk Handling Asia 1995 Conference, Singapore, 1995.

8. B.K. Datta and A.K. Basu, Estimation of Limit Deposit Velocity in Dilute Phase Pneumatic Conveying, Powder Handling & Processing 8(3) (1996) 235–239.

9. B.K. Datta and A.K. Basu, Acceleration Length in Dilute Phase Pneumatic Conveying of Solids, Journal of the Institution of Engineers(India) 78 (1997) 60–62.

10. B.K. Datta and A.K. Basu, A Performance Study of DVFTs in Dilute Phase Pneumatic Conveying, Powder Handling & Processing 11(2) (1999) 207–211.

11. B.K. Datta and C.K. Jain, Design of Pneumatic Conveying System for Coal, Proceedings of All India Seminar on Design & Selection of Kinematics for Handling Equipment, Institution of Engineers (India), Calcutta, India, 1988.

12. B.K. Datta and C. Ratnayake, A Simple Technique For Scaling Up Pneumatic Conveying Systems, Particulate Science and Technology 21(3) (2003) 227-236.

13. S.V. Dhodapkar and G.E. Klinzing, Proceedings of 3rd World Congress of Powder Technology, Kyoto, Japan, September 1990.

14. S.V. Dhodapkar and G.E. Klinzing, Pressure Fluctuations in Pneumatic Conveying Systems, Powder Tech 74 (1993) 179.

15. S.V. Dhodapkar and G.E. Klinzing, Pressure Fluctuation Analysis for Fluidized Bed, AIChE Symposium Series #296 89 (1993) 170.

16. S.V. Dhodopkar, G.E. Klinzing, F.J. Cabrejos, J. Baker, M. Weintraub and W-C Yang, Survey of Characterization of Dry Ultra-Fine Coals and Their Relationships to Transport, Handling and Storage, Powder Tech 74 (1993) 179.

17. T. Jotaki and Y. Tomita, Flow in the Acceleration Region of Pneumatic Transport of Granular Solids in Vertical, in Proceedings of the 3^rd International Conference on the Pneumatic Transport of Solids in Pipes, Paper D8, Bath, England, April, 1976.

18. T. Jotaki, Y. Tomita, K. Fujimoto and M. Iwasaki, Pressure Drop in an Equilibrium Region of Vertical Pneumatic Transport, Bulletin of JSME 21-151 (1978) 128-133.

19. T. Han, A. Levy, H. Kalman and Y. Peng, Model for Dilute Gas-Particle Flows in Constant-Area Lance with Heating and Friction, Powder Technology 112 (2000) 283-288.

20. K. Horii, Y. Matsumae, X. Cheng and M. Takei, A Study of Spiral Flow (Part2) ---Vortex Phenomena in a Specially Shaped Bend---, Transactions of the Japan Society for Aeronautical and Space Sciences 31-92 (1988) 71-78.

21. K. Horii, Y. Matsumae, X. Cheng, M. Takei and B. Hashimoto, A Study of Spiral Flow (Part 3) ---Opening and Orientation Control of Fiber by Spiral Flow---, Transactions of the Japan Society for Aeronautical and Space Sciences 32-98 (1990) 155-164.

22. K. Horii, Y. Matsumae, X. Cheng, M. Takei and B. Hashimoto, A Study of Spiral Flow (Part 4) ---The Effect of Radial Reynolds Number of Spiral Flow on Plasma Deposition of Pipe--- Transactions of the Japan Society for Aeronautical and Space Sciences 32-98 (1990) 165-175.

23. K. Horii, Y. Matsumae, X. Cheng, M. Takei and B. Hashimoto, A Study of Spiral Flow (Part 5) ---Analysis of Frictional Force Acting on Short Fiber--- Transactions of the Japan Society for Aeronautical and Space Sciences 32-98 (1990) 176-183.

24. K. Horii, Y. Matsumae, X. Cheng, M. Takei and B. Hashimoto, The Rope Passing Method for Repair of Petrochemical Pipelines with Spiral Flow, Journal of The Japan Petroleum Institute 33-5 (1990) 291-298.

25. K. Horii, Y. Matsumae, X. Cheng, M. Takei and B. Hashimoto, Focusing Phenomenon and Stability of Spiral-Flow Jet, Transactions of the Japan Society for Aeronautical and Space Sciences 33-102 (1991) 141-153.

26. G.E. Klinzing, Frictional Losses in Foam Damped Flexible Tubes, IEC Proc Des & Develop 8 (1969) 112.

27. G.E. Klinzing, Friction in Turbulent Flow of Solids Gas Systems, Canadian J Chemical Eng 50 (1972) 441.

28. G.E. Klinzing, Pneumatic Transport in the Region of Minimum Pressure Drop, IEC Proc Des & Develop 18 (1979) 404.

29. G.E. Klinzing, Damping Solid ‑ Flow Fluctuations, CES 34 (1979) 971.

30. G.E. Klinzing, Gas ‑ Solid Transport Flow Regimes ‑ Design and Measurement, Proceedings of Chempor 81, Oporto, Portugal, April 1981.

31. G.E. Klinzing, Particle‑Wall Interactions as Related to Slip Velocities, Chem Eng Comm 35 (1985) 223.

32. G.E. Klinzing, Observations from Electrostatically Charged Conveying Systems, in Proceedings of Third Nisshin Engineering Particle Technology International Seminar, Kyoto, Japan, November 1994; p. 21.

33. G.E. Klinzing and M.P. Mathur, The Behavior of the Slip Velocity and Its Relationship in Pneumatic Conveying, CEP Symposium Series #234, p 80, 1984

34. G.E. Klinzing, M.P. Mathur, T.B. Tuba and D.J. Wildman, Explorations into Thermodynamic Analogies and Critical Points in Reference to Gas‑Solid Transport, CEP Symposium Series 80 (1985) 72.

35. G.E. Klinzing, M.P. Mathur, D.J. Wildman and J.M. Ekmann, Transport of Coal with Steam, CEP Symposium Series #255 83 (1987) 58.

36. Y. Matsumae, X. Cheng, M. Takei and K. Horii, A Study of Short Fiber Transportation Using a Spiral Flow ---Analysis of Force Acting on a Short Fiber---, Theoretical and Applied Mechanics 37 (1989) 73-79.

37. C.A. Myler, A. Zaltash, S. Dhodapkar and G.E. Klinzing, A Simplied Correlation for Solids Friction Factor in Horizontal Conveying Systems Based on Yang's Unified Theory, Powder Tech 58 (1989) 187‑193.

38. C.A. Myler, A. Zaltash and G.E. Klinzing, Gas‑Solid Transport in a 00508 m Pipe at Various Inclinations With and Without Electrostatics I: Particle Velocity and Pressure Drop, J Powder & Bulk Solids Tech 10 (1986) 5.

39. C.A. Myler, A. Zaltash and G.E. Klinzing, Gas‑Solid Transport in a 0.0508 m Pipe at Various Inclinations With and Without Electrostatics II: Stability, J Powder & Bulk Solids Tech 10 (1986) 13.

40. M. Ochi and M. Takei, Flow Characteristics in Horizontal Pneumatic Conveyance at Low Fluid Velocities –3: additional pressure drop and the friction factor, Advanced Powder Technology.6-3 (1996) 317-324.

41. X. Peng, Y. Tomita, H. Tashiro and K. Funatsu, Motion of a Single Particle in a Horizontal Pipe, Advanced Powder Technology 7-2 (1996) 101-109.

42. L.K. Peters, G.E. Klinzing and D.W. Bender, Friction Modification in a Coupled System, AIChE J 20 (1974) 660.

43. S.I. Plasynski, G.E. Klinzing and M.P. Mathur, Pressure Fluctuation Behavior in High Pressure Transport System, in Proceedings of 4th Circulating Fluid Bed Conference, Hidden Valley, PA, August 1993.

44. S.I. Plasynski, G.E. Klinzing and M.P. Mathur, High Pressure Vertical Pneumatic Transport Investigation, Powder Tech 79 (1994) 95‑109.

45. T. Tanaka, S. Yonemura and Y. Tsuji, Discrete Particle Simulation of Dispersed Particulate Flows, in Proc. Int. Symp. Reliable Flow of Particulate Solids II, Oslo, Norway, pp. 373-378, 1993.

46. Y. Tsuji, Prediction of Pressure Drop and Optimal Design of Dilute Phase Pneumatic Conveying Systems, in Proc. PNEUMATECH I, Stratford-upon-Avon, UK, 1982.

47. Y. Tsuji, N.Y. Shen and Y. Morikawa, Lagrangian Simulation of Dilute Gas-Solid Flows in a Horizontal Pipe, Advanced Powder Technology 2/1 (1991) 63-81.

48. S. Rastogi and G.E. Klinzing, Pneumatic Transport of Dry Ultrafine Coal and Analysis of Pressure Signals, Particulate Science and Tech 10 (1992) 21.

49. N.D. Rohatgi, C.A. Myler, A. Zaltash, G.E. Klinzing and S. Dhodapkar, Pneumatic Transport of Solids in an Inclined Geometry, Canad J Chem Eng 67 (1989) 287.

50. M. Takei, Y. Matsumae, X. Cheng, B. Hashimoto, S. Isago, A. Hashidate and K. Horii, Use of Swirling flow for Wire Passing in a Wire-Cut Electrical Discharge Machine, Theoretical and Applied Mechanics 40 (1992) 197-203.

Return